N3D-CAST363
Delivering ultra-low viscosity, minimal ash content, and excellent green strength for investment casting patterns and large, lightweight models.
Low-viscosity casting resin for 335nm large-format SLA systems, designed for clean burnout and reliable green strength.
Overview
Manufactured by Arkema Sartomer
N3D-CAST363 is finely tuned to unlock the full potential of open 335nm large-format SLA printers for investment casting patterns.
With ultra-low viscosity for fast re-coating, minimal ash content for cleaner burnout, and excellent green strength for handling and finishing, this resin is designed to support larger builds and lightweight geometries. It contains no Antimony and no Phosphorous.
Applications
- Investment casting patterns
- Large and lightweight models
Key benefits
- Ultra-low viscosity for large-format printing
- Excellent green strength
- Low ash content for cleaner burnout
- Excellent surface finish
Resins from trusted manufacturers
Mechano (Mechnano)
Advanced photopolymer materials enhanced with discrete carbon nanotube technology for improved mechanical and electrical behaviour (including ESD-focused formulations).
- ESD-capable photopolymers
- Strength and impact improvements
Spectra Photopolymers
Radiation-curing specialists developing photopolymer materials for 3D printing, coatings and adhesives -well-suited to custom formulations and application-led performance.
- 3D printing resin development
- Coatings and adhesive know-how
Arkema (Sartomer)
Global supplier of UV/LED/EB photocure chemistry (resins, monomers and additives) used widely across high-performance coatings and photopolymer applications.
- Photocure resins and monomers
- Broad formulation toolbox
BASF (Forward AM)
Industrial photopolymers designed for structural performance and UV stability, with a portfolio spanning prototyping through end-use production parts.
- Ultracur3D® photopolymers
- Production-minded material range
Raplas materials are formulated and supplied in collaboration with established photopolymer and chemical manufacturers, giving you predictable processing and reliable part performance.
Material specifications
| Tensile Modulus | 3300 MPa |
| Tensile Strength | 38 MPa |
| Elongation | 4.0% |
| Water absorption (mass gain) | 0.19% |
| Flexural Modulus | 3500 MPa |
| Flexural Strength | 91 MPa |
| Shore Hardness | 88 D |
| HDT @ 0.455 MPa | 72°C |
| HDT @ 1.82 MPa | 53°C |
| CTE (µm/m·°C) T>Tg / T<Tg | 186 / 55.7 |
Downloads
Access technical documentation and resources below.
📄
Datasheet
PDF • 460 kB
Gallery
Ready to upgrade your production?
Get in touch with our team to discuss custom configurations and pricing tailored to your business needs.